 |
Our products have a wide range of safety features to give you peace of mind.
Mitsubishi Emergency Landing Device (MELD)
If the power goes out while you are using the elevator, you don't have to worry about being stuck in a dark space. When a power outage does happen, battery power is used to turn on the emergency light, automatically descend to the nearest floor, where the doors will open.
Other Safety Features
(1) Emergency Buzzer Button
To inform your family in case of emergency.
(2) Overload Alarm Buzzer
The alarm buzzes and stay doors open when overload.
(3) Entrance Door Lock Device
Entrance door is automatically locked and never make doors open in the floor which the car is not been stopping at.
(4) Over Speed Limiting Device
The car is electrically stopped in case of over speed.
(5) Safety Gear
The car is mechanically stopped in case that even one of ropes is loosened.
(6) Limit Switch
The car is electrically stopped in case of over run.
(7) Buffer
To make impact shock smaller in case of over run.
(8) Next Landing
When the doors fail to open at the selected floor, the car lands at another floor and the doors open.
(9) Safe Landing
Upon temporary troubles during operation, if safety equipment doesn't activate the car will automatically land at the nearest floor.
(10) Multi-Beam Sensor for SVB200/SVC200 (2CO Type)
The sensor consists of as many as 54 infrared light beams, and immediately reverses the closing doors when any of the beam is blocked.
(11) Door Safety Shoe for SED200/SED300 (2S Type)
Door safety shoe detects passengers or objects during doors closing.
(12) Unintended Car Movement Protection System (UCMP) for SVC200 (2CO Type)
To protect not to move the car by detecting "car movement and door open at the same time" through independent electrical circuit even if the operation controller circuit or the one brake happens failure.
UCMP consists of double brake and brake switch etc.
|